Summary
Minimum requirements
Note: See the Recommended configuration section below for recommended CPU, RAM, Harddrive, and Monitor selections.
Internet Access Required for Sage 300 Construction and Real Estate
In order to install and use Sage 300 Construction and Real Estate version 16.1, your server and
workstations must have Internet access due to Pervasive licensing requirements.
Note: Sage 300 Construction, Sage 50, and Sage 300 (formerly Sage Timberline Office, Sage Peachtree, and Sage ERP Accpac respectively) cannot be installed on the same computer, as they use different versions of Pervasive that are not compatible. Contact your business partner or support professional for Terminal Services solution.
Hardware Requirements
Server | Workstation | |
Processor | Quad-Core, 3 GHz+ | Single/Dual/Quad-Core, 2GHz+ |
RAM | 8GB+ | 4GB+ |
Hard Disk Space:
IMPORTANT: Do not install Sage 300 Construction and Real Estate products until you have
sufficient hard disk space available.
Server or Stand-alone computer
Product | Hard disk space | Purpose and considerations |
Accounting and Management products | Up to 2.2 GB | For program files, not including prerequisites. Depends on the number of applications installed. |
Estimating products | Up to 2.1 GB | For program files. |
Document Management | Up to 400 MB | For program files. Depends on configuration. |
Third-party components | Up to 1.2 GB | Prerequisites installed by Sage 300 Construction and Real Estate as necessary |
Workstations
Product | Hard disk space | Purpose and considerations |
Accounting and Management products | Up to 800 MB | For program files, not including prerequisites. Depends on the number of applications installed. This assumes that a server hosts Accounting and Management Data. |
Estimating products | Up to 2.1 GB | For program files. |
Document Management | Up to 200 MB | For program files. Depends on configuration. |
Third-party components | Up to 600 MB | Prerequisites installed by Sage 300 Construction and Real Estate as necessary |
Additional Requirements:
Requirement | Purpose and specifications |
Wired Network Adapter | Connects computer to a network. Must be a high-quality device. Wireless connections are subject to disconnects that can generate errors and other issues. |
Ports 443 and 80 | Set up your firewall to accept these ports. |
Port 25 | To send email with Sage Installation Manager, Sage 300 Construction and Real Estate and Document Management. |
Ports 8101 and 8102 | Sage Service Host |
Ports 3351/TCP, 1583/TCP, and 137 - 139 | Pervasive |
Printer | A Microsoft Certified printer driver is recommended. |
Monitor Resolution | For high-resolution color display. 1024 pixels by 768 pixels to 1920 pixels by 1080 pixels is recommended. Windows Font Scaling is not supported. Leaving this setting on the default option is recommended. |
Ports 80/TCP, 515/TCP, 11486-11488/TCP | Document Management and Cypress Ports |
Supported Operating Systems:
Operating Systems
- Windows Server 2016* (Supported with 16.1 Rev 5 and later - Essentials Edition and Domain Controllers are not supported)
- Windows Server 2012 R2* (Essentials Edition and Domain Controllers are not supported)
- Windows Server 2012*
- Windows 10 Enterprise*
- Windows 10 Professional*
- Windows 8.1 Enterprise Edition*
- Windows 8.1 Professional Edition*
- Windows Server 2008 R2 SP1**
- Windows 7 Professional SP1
- Windows 7 Ultimate SP1
- Windows 7 Enterprise SP1
* Before installing Sage 300 Construction and Real Estate on computers with the Windows Server 2016, Windows Server 2012, Windows 10, or Windows 8 operating system, you must install .NET 3.5. For instructions, see http://cdn.na.sage.com/SageMail/install_dotNet_3-5.html.
** At the time of this release, the following Sage and third-party software products were not supported on
Windows Server 2008:
- Sage Estimating Cut and Fill 5.23.0
- Sage Master Builder v13.3 and earlier
- GTCO TabletWorks 10.08 driver
- Primavera Project Planner (P3) 3.0
For more information, visit the website for that software.
Estimating Database Editor is not supported on Windows Terminal Services.
Software Requirements:
Sage 300 Construction and Real Estate requires the following software
Software | Purpose, specifications, and notes |
Adobe Reader 5.0 or later | For viewing software documentation in Adobe PDF format. For faxing and sending documents from Sage 300 Construction and Real Estate. Free downloads are available at www.adobe.com. |
Crystal Reports For Sage 2013 SP2 | For modifying and creating Crystal Reports designs. |
Microsoft Internet Explorer | Internet Explorer 11 is recommended. Web based features and functionality in Desktop are tested for compatibility with IE 11. |
Microsoft .NET 3.5 Service Pack 1 Microsoft .NET 4.5.2 | Installed as a prerequisite. If not already installed, it will restart your server and workstations after the prerequisites are installed. |
Microsoft Office 2010 SP1 | Microsoft Outlook is used for email features. Sage 300 Construction and Real Estate is compatible with:
|
Windows Services | Print service for printing. Log Viewer for troubleshooting. Print service and Log Viewer must be available on the server and workstations. |
Recommended configuration
Server Recommendation
- CPU: Current generation multi-core Xeon or i7 @ 3GHz+
- RAM: 32 GB or more
- Harddrive: SSD recommended
- OS: 64-bit Server OS
Client Recommendation
- CPU: Current generation i7 @ 3GHz+
- RAM: 16 GB or more
- Harddrive: SSD recommended
- OS: 64-bit
- Monitor: Up to full HD 1920 x 1080 widescreen at 60 Hz with pixel pitch of 0.311mm or greater
- Avoid 2K or 4K monitors with resolutions greater than 1920 x 1080
- Avoid changing the default Windows font size